mounting holes mounting dimensions when used with safety elements the max. outer diameter must not exceed the outer diameter of the screw head. mounting holes for wall mounting receptacles style a, b1, b2, c1, c2, j1, j2, n1 and n2 acc. to VG95234 shell size 10sl 12s 14s 16s 16 18 20 22 24 28 32 36 style a d1 h12 16.40 (.646) 16.40 (.646) 19.70 (.776) 22.90 (.902) 22.90 (.902) 26.10 (1.028) 29.50 (1.161) 32.70 (1.287) 36.00 (1.417) 42.00 (1.654) 48.30 (1.902) 54.60 (2.150) style b1, b2 c1, c2, j1, j2 n1, n2 18.50 (.728) 21.70 (.854) 24.90 (.980) 27.70 (1.091) 27.70 (1.091) 31.10 (1.224) 34.50 (1.358) 37.80 (1.488) 41.30 (1.626) 47.10 (1.854) 53.80 (2.1 18) 60.00 (2.362) style a, b2, c2 j2, n2 3.40 (.134) 3.40 (.134) 3.40 (.134) 3.40 (.134) 3.40 (.134) 3.40 (.134) 3.40 (.134) 3.40 (.134) 3.90 (.154) 3.90 (.154) 4.50 (.177) 4.50 (.177) style b1, c1, j1, n1 4.50 (.177) 4.50 (.177) 4.50 (.177) 4.50 (.177) 4.50 (.177) 4.50 (.177) 4.50 (.177) 4.50 (.177) 4.50 (.177) 5.50 (.217) 5.50 (.217) 5.50 (.217) e 0.15(.006) 18.20 (.717) 20.60 (.81 1) 23.00 (.906) 24.60 (.969) 24.60 (.969) 27.00 (1.063) 29.40 (1.157) 31.80 (1.252) 34.90 (1.374) 39.70 (1.563) 44.50 (1.752) 49.20 (1.937) style a, b2, c2, j2 n2 m3...din 85 m3...din 85 m3...din 85 m3...din 85 m3...din 85 m3...din 85 m3...din 85 m3...din 85 m3.5...din 85 m3.5...din 85 m4...din 85 m4...din 85 style b1, c1, j1, n m4...din 84 m4...din 84 m4...din 84 m4...din 84 m4...din 84 m4...din 84 m4...din 84 m4...din 84 m4...din 84 m5...din 84 m5...din 84 m5...din 84 d2 h13 d2 screw t o be used sungjin connect or & connection technologies tel : 82-31-318-0942 f ax : 82-31-318-0945 www .sjcnt.co.kr 44 VG95234 connectors d1 e e d2 .com .com .com 4 .com u datasheet
harnessing 1. all dimensions are millimeters. a wg - 16s / 15s 12 - 8 4 0 10 16/15 25 60 100 160 500 - 16 12 - 8 4 0 0.75-1.00 0.75-1.50 2.50 6.00 10.00 16.00 50.00 contact size metric a wg metric - 2.20-2.80 3.10-3.50 - 5.50-6.50 8.50-9.40 1 1.50-13.00 a wg crimp-and solder contacts 2.20-2.50 2.20-2.80 3.10-3.50 4.40-4.90 5.90-6.50 7.10-7.70 12.10-12.80 insulation metric mm VG95234 connectors are designed for single wire harnessing. full sealing will be guaranteed only by using wires in accordance with mil-w -5086, ln9251(for a wg) and tl6145-009 and tl-6145-01 1(for metric wires). all other wires have to conform to wire and insulation diameters with the data given in the following table: w ire stripping either mechanical or hot stripping can be used. prevent condoctor or insulator damage. for solder contacts, conductors have to be pretinned. note : do not twist conductors used with crimp contacts. do not touch uninsulated conductors before crimping. t wisting of conductors and grease or lubricants on the wires cause poor crimp quallity . sungjin connect or & connection technologies tel : 82-31-318-0942 f ax : 82-31-318-0945 www .sjcnt.co.kr 45 VG95234 connectors 1. all dimensions are millimeters. a wg - 16s / 15s 12 8 4 0 10 16 / 15 25 60 / 100 160 500 contact size metric 4.00 6.20 1 1.80 1 1.80 1 1.80 13.70 stripping length mm mounting dimensions .com .com .com 4 .com u datasheet
|